top of page

Silver Floor 500

Silver Floor 500 Should be installed in accordance with AS/NZ 4200.s: 1994 Pliable Membranes and underlays, Part 2 Installation Requirements. SILVERFLOOR is conveniently installed by rolling the roll between the joists, keeping the material under tension with one hand and fastening with a hammer stapler. To ensure maximum durability, galvanized staples should be used. SILVERFLOOR should be installed at least 90mm from the underside of flooring, i.e. at the bottom of a standard joist.
SILVERFLOOR is not designed to withstand prolonged direct exposure to the elements. Accordingly upon application of this product the structure should be enclosed without delay. Aluminum foils should not come in contact with wet concrete or mortar, as the aluminum is susceptible to alkali corrosion.

Insulation:

Typical Total R values for SLIVERFLOOR when installed under floors with a sealed air space are: Winter R3 Summer R1.5

Dimensions:

SILVERFLOOR is available in the following size: Product joist centers width roll length coverage SilverFloor 450cc 500mm 60m (30sqm) 27sqm​

BCA Compliant:

​SILVERFLOOR Extra Tough complies with AS/NZS 4200.1 and AS/NZS 4859.1 and therefore satisfies all.

silver floor 502
silver floor 503
silver floor 505
silver floor 506
bottom of page